Printing Forms - OKIDATA Pacemark 3410 Instruction Manual

Printing Forms

To use the Printing Forms table below, read:
V For this form... to identify the form you wish to print.
V Use these printer settings... to identify the printer settings required to
print the form. Sometimes the printer settings for the DX10 system differ
from those for the Eagle system and are indicated as such in this column.
V Use for this report... to determine the form used for a report.
For additional information about printing forms, see "Using Printer Menus" on
page 3 and "Changing Printer Settings" on page 4.
For this Use these
form... printer settings...
8 1/2 x 11 inch Change CPI to 17
paper
Leave all others at Triad
defaults
15 x 8 1/2 inch Change LPI to 8
paper
Leave all others at Triad
defaults
Accounts If DX10, change LPI to 8
Payable Checks
If Eagle, change LPI to 6
Leave all others at Triad
defaults
Accounts Leave at Triad defaults
Receivable
Statements
Accounts Leave at Triad defaults
Receivable
Mailing Labels
Bin Labels Change LPI to 8
Leave all others at Triad
defaults
Invoices Change CPI to 17
Leave all others at Triad
defaults
2
Printing Forms
Use for this report...
All reports
All reports
If DX10, RACK (Check
Processing)
If Eagle, APCM (Check
Processing)
RSM (Statement Report)
RML (Customer Mailing
Labels Report)
RBL (Bin Label Printing
Report)
POS (Point-of-Sale)
invoices
CPOS (Contractor Point-
of-Sale) invoices
Printing Forms