Honda Dream DX CD110 Owner's Manual page 57

Adjust the brake (page 12).
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not rotate
freely.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Rear Wheel Removal
1. Place the vehicle on its center stand.
2. Remove the drive chain cases page 47.
3. Remove the rear "Brake Adjusting Nut
"(1). Disconnect
from the "Brake Arm" (3).
4. Disconnect the "Brake Stopper Arm" (4)
from the brake panel by removing the
"Cotter Pin" (5) "Stopper Arm Nut" (6).
5. Loose the "Drive Chain Lock Nuts" (8)
and "Drive Chain Adjusting Nut" (7).
6. Remove the "Rear Axle Nut" (9) and
"Sleeve Nut" (10).
Honda Motorcycle & Scooter India Pvt. Ltd.
the "Brake Rod" (2)
(9)
(8)
(7)
(1) Brake Adjusting Nut
(2) Brake Rod
(3) Brake Arm
(4) Brake Stopper Arm
(5) Cotter Pin
(6) Stopper Arm Nut
(7) Drive Chain Adjusting Nut
(8) Drive Chain Lock Nut
(9) Rear Axle Nut
(3)
(2)
(4)
(5)
(1) (6)
53
CD110 Dream DX