BRAKE/TAIL LIGHT BULB
1. Remove the "Screws" (1).
2. Remove the "Taillight Lens" (2) by
pulling it down and pull out from the
rear cowl.
3. Slightly press the "Bulb" (3) and turn it
counterclockwise.
4. Install a new bulb in the reverse order
of removal.
5. Push the taillight lens upwards on
installing it back into place to lock the
"Tab" (4) into the "Groove" (5) of the
rear cowl as shown in illustration
Removal:
(2)
(1)
62
CD110 Dream DX
.
Pull down tail
light lens
Pull out tail
light lens
Installation:
(4)
(3)
(2)
(1)
(1) Screws
(2) Taillight Lens
(3) Bulb
(4) Tabs
(5) Rear Cowl Groove
Honda Motorcycle & Scooter India Pvt. Ltd.
(5)
Push
upwards to
lock into
groove
Place tail
light lens in
rear cowl