Table of Contents
Advertisement
5.5.6 Power Saving
About power saving
When the active input(s) is (are) missing, this setting allows the display to switch off the backlight and enter a
low power mode. In this status the availability of the selected input is checked periodically.
The unit can exit from power save mode in two cases:
1. When a signal is applied on the selected input (or any input in case of auto).
2. By activating the OSD menu, see "OSD menu activation", page 31.
To enable/disable power saving
1.
Bring up the OSD main menu.
2.
Navigate to the System menu.
3.
Enter the Power Saving submenu.
4.
Enable/Disable power saving as desired and confirm.
Advanced operation
K5902105 (451920611795) /04
MDSC-2232
53
Advertisement
Table of Contents
