Broadcom Megaraid And Hba Tri-Mode Storage Adapter Characteristics; Megaraid 9560-16I Adapter - Connector And Led Designations - Broadcom 95 Series User Manual

Broadcom 95xx User Guide
Broadcom MegaRAID and HBA Tri-Mode Storage Adapter
Characteristics
MegaRAID 9560-16i Adapter – Connector and LED Designations
The adapter is a 6.127 in. × 2.712 in. (155.65 mm × 68.90 mm) board. The component height on the top and bottom of the
adapter complies with the PCIe specification.
The following figure shows the connectors and LED locations on the adapter. Pin 1 on the headers and connectors is
highlighted in red in the figure.
Figure 3: Card Layout for the MegaRAID 9560-16i Tri-Mode Storage Adapter
The following table describes the headers and connectors on the adapter.
Table 12: Headers and Connectors
Connector
J2 Standard edge card connector
J4 Default serial boot ROM (SBR) header 2-pin connector. Reserved for Broadcom use.
J7 Advanced software options hardware
key header
J8 Onboard serial UART connector
J10 Global HDD activity LED header
Broadcom
Type
The interface between the storage adapter and the host system.
With the PCIe interface, this connector provides power to the board and an
2
I C interface connected to the I
Interface (IPMI).
2-pin connector.
Enables support for selected advanced features.
4-pin connector. Reserved for Broadcom use.
2-pin connector.
Connects to an LED that indicates activity on the drives connected to the adapter.
®
Broadcom 95xx PCIe 4.0 MegaRAID
Description
2
C bus for the Intelligent Platform Management
®
and HBA Tri-Mode Storage Adapters
95xx-MR-HBA-Tri-Mode-UG104
24