Yamaha Z200N Service Manual page 360

– +
ELEC
1
2
STARTER MOTOR
8540
8550
8560
8570
REMOVING THE STARTER MOTOR
PINION
Remove:
• Clip 1
NOTE:
Slide the pinion stopper 2 down as shown
and then remove the clip.
CHECKING THE STARTER MOTOR
PINION
1. Check:
• Starter motor pinion teeth
Damage/wear → Replace.
2. Check:
• Starter motor pinion movement
Incorrect → Replace.
NOTE:
Rotate the starter motor pinion clockwise
and make sure it moves smoothly. Also,
rotate the starter motor pinion counter-
clockwise and make sure it locks.
CHECKING THE ARMATURE
1. Check:
• Commutator
Foreign matter → Clean.
(with 600 grit sandpaper)
2. Measure:
• Commutator diameter
Out of specification → Replace.
Commutator diameter limit
28.0 mm (1.10 in)
8-37
E
8
8
8