Yamaha Z200N Service Manual page 355

– +
ELEC
STARTING SYSTEM
8520
CHECKING THE BATTERY
Refer to "CHECKING THE BATTERY"
on page 3-19.
CHECKING THE FUSES
Refer to "CHECKING THE FUSES" on
page 8-13.
CHECKING THE FUSE HOLDER
Refer to
HOLDER" on page 8-13.
CHECKING THE WIRE HARNESS
CONTINUITY
Check:
• Wire harness continuity
No continuity → Replace.
CHECKING THE WIRE CONNECTIONS
Check:
• Wire connections
Poor connection → Properly connect.
CHECKING THE STARTER RELAY
Check:
• Starter relay continuity
No continuity → Replace.
Checking steps
(1) Connect
between the starter relay terminals.
Positive digital tester probe 1 →
Starter relay terminal
Negative digital tester probe 2 →
Starter relay terminal
Positive battery terminal →
Brown lead 3
Negative battery terminal →
Black lead 4
(2) Check that there is continuity between
the starter relay terminals.
8-32
"CHECKING THE
the tester and
E
8
8
8
FUSE
8
8
8
battery