Disassembly And Assembly - Yamaha Z200N Service Manual

Hide thumbs Also See for Z200N:

Table of Contents

SAFETY WHILE WORKING

3. Non-reusable items

Always use new gaskets, packings, O-

rings, split-pins, circlips, etc., on reas-

DISASSEMBLY AND ASSEMBLY

1. Clean parts with compressed air when

disassembling.

2. Oil the contact surfaces of moving parts

before assembly.

3. After assembly, check that moving parts

operate normally.

4. Install bearings with the manufacturer's

markings on the side exposed to view,

and liberally oil the bearings.

5. When installing oil seals, apply a light

coating of water-resistant grease to the

outside diameter.

Table of Contents

Lz200n Z200y Lz200y