Installing The Reverse Gear; Installing The Pinion - Yamaha Z200N Service Manual

Hide thumbs Also See for Z200N:

Table of Contents

DRIVE SHAFT (COUNTER ROTATION MODELS)

Oil seal installation position a

0.25 - 0.75 mm (0.010 - 0.030 in)

Bearing/oil seal attachment .... 1

YB-06195 / 90890-06633

Driver rod .................................. 2

YB-06071 / 90890-06652

INSTALLING THE REVERSE GEAR

• Thrust bearing

• Reverse gear assembly

Install the thrust bearing onto the reverse

gear assembly and position the thrust bear-

ing so its rounded side faces away from the

reverse gear.

• Pinion nut

95 Nm (9.5 m • kgf, 68 ft • lb)

Drive shaft holder ..................... 1

YB-06201 / 90890-06520

Pinion nut holder ...................... 2

Pinion nut holder attachment . 3

Table of Contents

Lz200n Z200y Lz200y