GE CFE29TS Manual page 70

Service Diagnostics Failure Codes
Once in diagnostic mode with ZEROS in the temperature displays, press "GO" on
(LCD models) or any other button, other than temperature setting, (LED models) to
retrieve any stored error codes.
FZ FF
Display Display
00 00
00 01
00 02
00 06
00 07
00 08
00 11
00 12
00 13
00 14
00 15
00 16
To scroll through failure codes, press the Up arrow for the FF temperature adjustment.
To return to previously displayed failure code, press the down arrow for the FF temperature
adjustment. FF controls are on the right of the display.
Mode
Get F Codes
Clear F Codes
Dispenser Self-Test Mode
COM Version
Degrees C Mode
Degrees F Mode
Join Zigbee™ Network
Leave Zigbee™ Network
Get Zigbee™ Network Status
Force FF and FZ Defrost
Exits All Defrost
Exit All Tests
Comments
See F Code Section
Clears all the stored codes by pressing GO (LCD
models) or any other button on (LED models) other
than temperature.
Turns on all LEDs and 7 Segments on the Dispenser board for
testing.
Return the Com Version (Only on LCD Models)
Changes the System to be Degrees C
Changes the System to be Degrees F
Join a energy management Network
Leave a energy management Network
Check the energy management Network status
Starts a FF and FZ defrost
Forces the Heated Defrost to the Idle State
Resets all boards in the system
70