Hot Water Selection - GE CFE29TS Manual

• When the 'Hot Water' button is pressed the control
goes to the Fill Check Mode to ensure the tank is full
and fill it if it was not full.
• If the tank is not full it goes into the 'Hot Water
Setup' to fill the tank.
• If the tank is full the control displays the "Hot Water'
screen.
• With a full tank the control will check both Hot
Water thermistors for valid readings the control
goes into the Standby Mode waiting for consumer to
select a 'Hot Water' setting .
• The consumer has the option to select between 4
predetermined set points or a custom temperature
from 90˚ to 185˚ F in 5˚increments.

HOT WATER SELECTION

Press 'Hot Water' button to enter Standby
Mode then onto the selection screen
The BLUE LED ring surrounding the 'Hot
Water' button will be lit for the duration of
all Hot Water functions.