Fill Mode - GE CFE29TS Manual

RED Knob LED pulsing .
Time out 30 sec to 'Setup Canceled'
Red knob LED off
Displayed for 3 seconds then to
'Home Screen'.
Displays if a hot water system error occurs
Fill Check Mode (continued)
• If the 30 sec. Delay Timer expires before the T & P switch is reactivated, the control turns off the
'Setup Canceled' for 3 seconds then go to the UI home screen.
• If the Maximum Fill Timer is expired while T & P switch is activated, the control turns off the
Water valve and the LCD screen will display
• When the tanks is full the RED
seconds and run the Thermistor Check Mode.
• During the 3 seconds, if the consumer presses the Hot Water button, the control will display the
the during the filling operation the LCD screen will display

Fill Mode

RED Knob LED on
Time out 30 sec to
'Setup Canceled'
RED Knob LED pulsing .
Time out 30 sec. to
'Setup Canceled' for 3 seconds then go to the refrigerator home screen.
LED turns off, UI sounds a tone, the isolation & Hot Water valves are deactivated and the LCD screen will display 'Complete' for 3
'Setup
Release T&P switch
If knob is
released
Before filled
'Setup Canceled'
Cancel Screen any time
Cancel is pressed, time expires
RED
RED LED around the T & P switch, isolation water valve, the Hot
'Hot Water'
Canceled' for 3 seconds then go to the UI home screen.
Note: bypassed if tank is full
Home Screen
Red LED
Solid or Pulses
or any system
error occurs
LED around the T & P switch and the LCD screen will display
screen, If 'Cancel' pad is pressed on the LCD screen
)
(continued
Turn and Push
(T & P) switch
37