Advertisement
10
• While holding an M6 lock nut in place with the wrench, completely
tighten a screw with the Phillips screwdriver.
• Repeat this procedure tighten the other three screws.
PULL
11
• Check to be sure the frame is secure. While gently holding a base
down, pull up on the frame It should remain attached to the legs.
Customer Service
Tel. (800) 377-3777
Bassinet Frame Assembly
PULL
12
• Place the mattress support into the frame.
• Check to make sure battery compartment and male snap faces down.
note:
Make sure music module holes and music module battery
compartment are on the same side.
13
• Align the holes in the mattress support with the holes in the frame.
• Insert two M5 x 2.6cm screws through the mattress support and into
the frame.
7
Mattress Support
Front
M5 x 2.6cm Screws
Front
www.DeltaChildrensProducts.com
Advertisement
