Page 1
If you have any questions or missing parts, contact us. DO NOT return product parts to the store from where it was purchased before contacting Delta Children’s Products Customer Service. Make sure that all preassemble parts are tight. The appearance of your product may be different from that pictured in this booklet.
Page 2
*Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use. Do not use crib if any parts are missing, damaged or broken. Contact Delta Children's Products for replacement parts and instructional literature if needed. Do not substitute parts.
- Do not scratch or chip the finish. - Inspect the product periodically, contact delta children's products for replacement parts or questions. - Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement.
Page 4
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. B. LEFT REAR LEG x 1 A. BACK RAIL x 1 PRODUCT LABEL D. LEFT CRIB END x 1 C. RIGHT REAR LEG x 1 G. FRONT RAIL x 1 WARNING LABEL E.
Page 5
SECTION 1: CRIB ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP B. LEFT REAR LEG x 1 A. BACK RAIL x 1 M4 ALLEN WRENCH SUPPLIED L. M6 x 70 mm BOLT x 4 P. Φ4 x 30 mm METAL C.
Page 6
SECTION 1: CRIB ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP E. RIGHT CRIB END x 1 M4 ALLEN WRENCH SUPPLIED PRODUCT LABEL FROM STEP 1 D. LEFT CRIB WARNING LABEL M. M6 x 45 mm BOLT x 4 END x 1 Attach (1) Left Crib End (Part D) and (1) Right Crib End (Part E) to the assembly from Step 1 using (4) M6x45 Bolts (Part M).
Page 7
SECTION 1: CRIB ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED F. MATTRESS SUPPORT x 1 FROM STEP 2 N. M6 x 16 mm BOLT x 4 Attach the Mattress Support (Part F) in all corners using (1) M6X16 mm Bolt (Part N) in each corner. Tighten with the M4 Allen Wrench.
SECTION 1: CRIB ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP H. LEFT FRONT G. FRONT RAIL x 1 LEG x 1 M4 ALLEN WRENCH SUPPLIED L. M6 x 70 mm BOLT x 6 K. STABILIZER P. Φ4 x 30 mm METAL BAR x 1 J.
Page 9
SECTION 1: CRIB ASSEMBLY STEP 5 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED FROM STEP 4 M. M6 x 45 mm BOLT x 6 FROM STEP 3 Attach the assembly from Step 4 to the assembly from Step 3 using (6) M6x45mm Bolts (Part M). Tighten with the M4 Allen Wrench.
Page 10
If you have any questions or missing parts, contact us. DO NOT return product parts to the store from where it was purchased before contacting Delta Children’s Products Customer Service. Make sure that all preassemble parts are tight. The appearance of your product may be different from that pictured in this booklet.
Page 11
SECTION 2: TODDLER BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED Remove the Front Rail (Part G only) installed in Step 4 of Section 1 crib assembly. Make sure to leave Stabilizer Bar (Part K) attached along with Left and Right Front Legs (Part H and J). Make sure to remove all Metal Dowels (Part P) from top of Stabilizer and Legs.
Page 12
SECTION 2: TODDLER BED CONVERSION STEP 2 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS The mattress support must be in the lowest positions. Store all hardware safely. Read all warnings on page 3. As shown, use as a day bed or love seat sofa. Do Not use without stabilizer bar intalled.
Page 13
SECTION 3: FULL SIZE BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED You have the option to convert the crib to a full size bed. Simply follow steps in reverse order to disassemble the crib. The head board is the back rail assembly done through step 1 of section 1. To create the footboard, assemble (1) Left Front Leg (Part H) and (1) Right Front Leg (Part J) to the (1) Front Rail (Part G) and (1) Stabilizer Bar (Part K) using (8) Φ4x30mm Metal Pins (Part P) and (6) M6x70mm Bolts (Part L).
Page 14
Attach Bed Frame to the Headboard (From Section 3 Step 1) and Footboard (From Section 3 Step 1) using (8) M6 x 16mm Bolts (Part N). Follow all instructions supplied with the Bed Frame. Note: Bed Frame system is not included, see your furniture or mattress retailer. Contact Delta Chidren’s Products for information or with questions.
Page 15
Delta. To register your product for important safety alerts and updates to your product please visit www.DeltaChildren.com...