Page 1
New York, NY 10001 Tele.212-645-9033 FACTORY When contacting Delta Consumer Care please reference the above information. Before contacting Delta Consumer Care please ensure that the information above matches the information found on the label on the Crib End bottom rail,...
Page 2
*On soft bedding. Never add a mattress, pillow, comforter or padding. Use only the mattress provided by Delta Children’s Products. (Which must be at least 37 1/4 inches long by 23 3/8 inches wide and not more than 4 inches thick.) WARNING: Failure to follow these warnings and the instructions could result in serious injury or death.
Page 3
PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. Product Label B. Crib End no Product Label x 1 C. Stationary Side x 2 A. Crib End with Product Label x 1 Part # 24308 Part # 24541 Part # 24307 E.
Page 4
PARTS: HARDWARE KIT PART #24302-986 FOR COLOR 100 AND 108 OR #24302-987 FOR COLOR 260 AND 235 OR #24302-988 FOR COLOR 207. SEE FRONT COVER. H. 1/4” x 50 mm Bolt x 8 Part # 5768 No drills necessary. Do not use power screwdriver.
Page 5
Section 1: Crib Assembly Step 1 Parts and tools required to complete step. M4 Allen Wrench Supplied x 2 L. 1/4” x 22 mm Bolt x 8 F. Right Mattress Support Bracket x 2 D. Mattress Support x 1 M. 1/4” x 18 mm Cap Nut x 8 E.
Page 6
Section 1: Crib Assembly Step 2 Parts and tools required to complete step. H. 1/4” x 50 mm Bolt x 4 M4 Allen Wrench Supplied J. 1/4” x 25 mm Barrel Nut x 4 Product Label A. Crib End with B.
Page 7
Section 1: Crib Assembly Step 3 Parts and tools required to complete step. K. 1/4” x 18 mm Bolt x 4 From Step 1 From Step 2 M4 Allen Wrench Supplied Attach the assembly from step 1 to the assembly from step 2 using (4) 1/4”x18mm Bolts (Part K), Tighten with the M4 Allen Wrench.
Page 8
Section 1: Crib Assembly Step 4 Parts and tools required to complete step. H. 1/4” x 50 mm Bolt x 4 M4 Allen Wrench Supplied J. 1/4” x 25 mm Barrel Nut x 4 From Step 3 C. Stationary Side x 1 Attach (1) Stationary Side (Part C) to the assembly from step 3 using (4) 1/4”...
Page 9
Section 1: Crib Assembly Step 5 Parts and tools required to complete step. K. 1/4” x 18 mm Bolt x 4 M. 1/4” x 18 mm Cap Nut x 4 N. 2” Locking Caster x 2 M4 Allen Wrench From Step 4 Supplied P.
Page 10
New York, NY 10001 Tele.212-645-9033 FACTORY When contacting Delta Consumer Care please reference the above information. Before contacting Delta Consumer Care please ensure that the information above matches the information found on the label on the Crib End bottom rail,...
Page 11
Section 1: Crib Assembly Step 7 Parts and tools required to complete step. From Step 6 G. Mattress x 1 Place the Mattress (Part G) onto the Mattress Support (Part D) as shown.