Delta 7888 Instruction Manual
  1. Manuals
  2. Brands
  3. Delta Manuals
  4. Baby & Toddler Furniture
  5. 7888
  6. Instruction manual

Delta 7888 Instruction Manual

4 in 1 crib
Hide thumbs

Advertisement

Table of Contents

4 in 1 Crib
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
Consumer Care:
www.DeltaChildren.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Conforms to
ASTM F1169-10a Full
Size Crib & F1821
Safety Standards
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
December 7, 2012, 23343, R4
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
Style #:
___________
Lot:
___________
Date:
___________
When contacting Delta Consumer Care please reference
the above information. Before contacting Delta Consumer
Care please ensure that the information above matches the
information found on the label on the Crib End bottom rail,
please reference the information found on the product
when contacting Delta Consumer Care.
A
REV
FACTORY
©2012 DELTA ENTERPRISE CORP.

Advertisement

Table of Contents
loading

Related Manuals for Delta 7888

Summary of Contents for Delta 7888

  • Page 1 New York, NY 10001 Tele.212-645-9033 FACTORY When contacting Delta Consumer Care please reference the above information. Before contacting Delta Consumer Care please ensure that the information above matches the information found on the label on the Crib End bottom rail,...
  • Page 2 Securely tighten loose bolts and other fasteners. Do not use crib if any parts are missing, damaged or broken. Contact Delta Children's Products for replacement parts and instructional literature if needed. Do not substitute parts.

  • Page 3: Notes On Care And Maintenance

    - Do not scratch or chip the finish. - Inspect the product periodically, contact Delta Children's Products for replacement parts or questions. - Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement.
  • Page 4 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. D3. Right Back Post A. Top Rail x 2 C3. Left Back Post D1. Right End Panel C1. Left End Panel B. Back Side x 1 D2. Right Front Post C2. Left Front Post D.

  • Page 5: Hardware And Tools

    PARTS: HARDWARE AND TOOLS. No drills necessary. Do not J. M6 x 45 mm Bolt x 12 use power screwdriver. Part # 5466 K. M6 x15 mm Bolt x 4 Part # 5460 L. Φ4x30 mm Metal Pin x 4 Part # 5493 M.

  • Page 6: Section 1: Crib Assembly

    Section 1: Crib Assembly Step 1 Parts Pre-Assembled in the facotry, Ensure ALL bolts are TIGHT. Parts and tools required to complete step. D3. Right Back Post C3. Left Back Post D1. Right End Panel C1. Left End Panel M4 Allen Wrench Supplied D2.
  • Page 7 Section 1: Crib Assembly Step 2 Parts and tools required to complete step. A. Top Rail x 1 M4 Allen Wrench Supplied L. Φ4x30 mm Metal Pin x 2 D. Right Crib End x 1 C. Left Crib End x 1 B.
  • Page 8 Section 1: Crib Assembly Step 3 Parts and tools required to complete step. M4 Allen Wrench Supplied From Step 1 K. M6 x15 mm Bolt x 4 F. Mattress Support x 1 Attach the Mattress Support (Part F) in all corners using (1) M6x15 mm Bolt (Part K) in each corner. Tighten with the M4 Allen Wrench.
  • Page 9 Section 1: Crib Assembly Step 4 Parts and tools required to complete step. A. Top Rail x 1 M4 Allen Wrench Supplied L. Φ4x30 mm Metal Pin x 2 E. Front Side x 1 From Step 2 J. M6 x 45 mm Bolt x 6 Insert (2) Φ4x30 mm Metal Pin (Part L) into the top hole on each side of the Front Side (Part E), then attach the Front Side (Part E) to the assemblies from step 2 using (4) M6x45mm Bolts (Part J).
  • Page 10 114 West 26th Street Date: ___________ New York, NY 10001 Tele.212-645-9033 FACTORY When contacting Delta Consumer Care you will need to reference the above numbers. They can also be Conforms to found on the label on the Crib End ASTM F1169-10a Full Size Crib &...

  • Page 11: Section 2: Toddler Bed Conversion

    Section 2: Toddler Bed Conversion Step 1 Parts and tools required to complete step. M4 Allen Wrench Supplied Finished Crib Remove the Top Rail and Front Side installed in step 3 of Section 1 Crib Assembly.

  • Page 12: G. Stabilizer Bar X

    Section 2: Toddler Bed Conversion Step 2 Parts and tools required to complete step. M4 Allen Wrench Supplied G. Stabilizer Bar x 1 L. Φ4x30 mm Metal Pin x 2 From Step 1 J. M6 x 45 mm Bolt x 2 Attach the Stabilizer Bar (Part G) to the assembly from step 1 using (2) Φ4x30 mm Metal Pins (Part L) and (2) M6x45 mm Bolts (Part J).

  • Page 13: H. Guardrail X

    Section 2: Toddler Bed Conversion Step 3 Parts and tools required to complete step. M4 Allen Wrench Supplied H. Guardrail x 1 J. M6 x 45 mm Bolt x 3 From Step 2 Attach the Guardrail (Part H) to the assembly from step 2 using (3) M6x45 mm Bolts (Part J). Tighten with the M4 Allen Wrench.
  • Page 14 Section 2: Toddler Bed Conversion Step 4 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS The mattress support must be in the lowest positions. Store all hardware safely. Read all warnings on page 3. As shown, use as a day bed or love seat sofa. Do Not use without stabilizer bar installed.

  • Page 15: Section 3: Full Size Bed Conversion

    Section 3: Full Size Bed Conversion Step 1 Parts and tools required to complete step. M4 Allen Wrench Supplied You have the option to convert the crib to a Full Size Bed. Simply follow steps in reverse order to disassemble the crib. Then remove the rear legs from the Left Crib End and Right Crib End with the M4 Allen Wrench as shown.
  • Page 16 Section 3: Full Size Bed Conversion Step 2 Parts and tools required to complete step. K. M6 x15 mm Bolt x 4 M4 Allen Wrench Supplied M. Adapter Plate x 2 To use as a Full Size Bed Headboard only. Attach (2) Adapter Plates (Part M) to bottom of Rear Legs using (4) M6x15mm Bolts (Part K).
  • Page 17 Section 3: Full Size Bed Conversion Step 3 A bed rail system is available to fit your crib to convert to a complete Full Size Bed. Please see your crib retailer, visit www.DeltaChildren.com or contact Delta Consumer Care for more information.

  • Page 18: Warranty

    Delta. To register your product for important safety alerts and updates to your product please visit www.DeltaChildren.com...

Table of Contents