Unit Display Section - Mitsubishi Heavy Industries FDT100VNAWVH Service Manual

AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right)
direction.
SILENT button
This buttion changes the SILENT
operation.
(a) Models SRK50ZSX-W, 60ZSX-W
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.

Unit display section

ON TIMER button
This button selects ON TIMER operation.
Unit ON/OFF button
This button can be used for turning on/off
OFF TIMER button
the unit when a remote control is not available.
This button selects OFF TIMER
operation. Wireless remote control signal receiver
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
CLEAN switch
This switch selects the CLEAN
operation.
SLEEP button
This button selects SLEEP operation.
(b) Models SRK71ZR-W, 100ZR-W
Unit display section
Unit ON/OFF button
This button can be used for turning on/off the unit when
a remote control is not available.
RUN (HOT KEEP) light (green)
• Illuminates during operation.
• Blinks when airfl ow stops due to the 'HOT
KEEP' , ' CLEAN operation ' and ' operation
mode invalid '.
1.5 sec.
ON
HOT KEEP
OFF
3 sec.
ON
CLEAN operation
OFF
0.5 sec.
ON
Operation mode
invalid
OFF
0.5 sec.
•
RUN lights blink quickly during invalid operation mode.
•The above illustration shows all controls, but in
practice only the relevant parts are shown.
0.5 sec.
1 sec.
Illuminates during TIMER operation.
• Illuminates during operation.
•
Blinks slowly when SELF CLEAN operation (3 seconds ON, 1 second OFF).
•
Blinks when airflow is stopped to prevent blowing out of cold
air in heating operation. (1.5 seconds ON, 0.5 seconds OFF)
•
Blinks slowly when AUTO OFF operation during stand by
(3.5 seconds ON, 0.5 second OFF).
Remote control signal receiver
TIMER light (yellow)
Illuminates during TIMER operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
3D AUTO light (green)
Illuminates during 3D AUTO operation.
9
- -
direction.
3D AUTO button
This button sets 3D AUTO operation.
'19 • PAC-SM-309
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
SET/Child Lock button
Use this button to set the timer and
Child Lock.
CANCEL button
TIMER light (yellow)
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
RUN light (green)
This buttions is used for setting the cur-
rent time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
ACL switch
Switch for resetting microcomputer.
TIME SET UP switch
This switch is for setting the time.