Operation And Display Section For Remote Control - Mitsubishi Heavy Industries SRK20ZSXH-S User Manual

Operation and display section for remote control

OPERATION MODE select button
Each time the button is pressed, the
mode changes.
Page 13,15
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECO operation.
Page 24
AIR FLOW (LEFT/RIGHT) button
This button changes the airflow (left/
right) direction.
Page 16
SILENT button
This button sets the SILENT operation.
Page 25
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
Page 19
ON TIMER button
This button selects ON TIMER operation.
Page 18
OFF TIMER button
This button selects OFF TIMER
operation.
Page 17
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
Page 20
MENU switch
This switch selects the brightness
adjustment, AUTO OFF operation, SELF
CLEAN operation and PRESET operation.
Page 26
SLEEP button
This button selects SLEEP operation.
Page 17
Display in OFF status
The current time, day of the week,
and present OPERATING MODE are
displayed while the air-conditioner is
turned off.
[View with the cover opened]
The above illustration shows all controls, but in practice
only the relevant parts are shown.
Transmission procedure
When each button on the remote control is
pressed – with the remote control pointing
towards the air-conditioner unit, a signal is
transmitted.
When the air-conditioner receives the signal
correctly, it will beep.
– 12 –
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
Page 14
AIR FLOW (UP/DOWN) button
This button changes the airflow (up/
down) direction.
Page 16
3D AUTO button
This button sets 3D AUTO operation.
Page 16
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
Page 25
SET/Child lock button
Use this button to set the timer and
Child lock.
Page 9
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This button is used for setting the current
time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
Page 20
ACL switch
This switch resets the program to default
state.
Page 8, 13
TIME SET UP switch
This switch is used for setting the time.
Page 13