Mitsubishi Heavy Industries FDT100VNAWVH Service Manual page 60

This PCB is a general PCB. Replace the PCB according to this instruction.
b) Power PCB
i)Replace the PCB This PCB is a general PCB. Replace the PCB according to this instruction.
i) Replace the PCB
� Unscrew terminal(Arrow A) of the "E2" wiring(yellow/green) that is connected to PCB.
� Replace the PCB only after all the wirings connected to the connector are removed.
① Unscrew terminal of the wiring(yellow/green) connected to terminal block (CNWO) from the box.
� Fix the board such that it will not p inch any of the wires.
② Replace the PCB only after all the wirings connected to the connector are removed.
� Reconnect the wirings to the PCB. Wiring connector color should match with the color of connector of the PCB.
③ Fix the board such that it will not pinch any of the wires.
� Screw back the terminal(Arrow A) of the "E2" wiring, that was removed in 1.
④ Reconnect the wirings to the PCB. Wiring connector color should match with the color of connector of the PCB.
⑤ Screw back the terminal of wiring, that was removed in ①.
ii)Power PCB
Parts mounting are different by the kind of PCB.
ii) Power PCB
Parts mounting are different by the kind of
• Models FDU100VH2, 125VH, 140VH
• Models FDE50-140VH, FDUM50VH
CNW3（White）
Terminal block
CNW1(White）
CNW1(White）
Control PCB
Control PCB
CNW3(White）
Terminal block
• Models FDUM60VH, 71VH1, 100VH, 125VH, 140VH
CNW3(White）
Terminal block
CNW1(White）
Control PCB
PCB
.
CNM1(White）
Part number
CNM2(Black）
Fan motor2
CNM1(White）
CNM2(Black）
Fan motor2
Part number
59
- -
Fan motor
CNM1(White）
Fan motor1
CNW0（White）
Fan motor1 Terminal block
CNWR(White）
Reactor
'19 • PAC-SM-309
PSC012D021
B
CNWR(White）
Reactor
CNW0（White）
Terminal block
Ａ
CNW0（White）
Terminal block
Part number
PSB012D993