Sentence Output Filtering - ACR Electronics AISLink CA2 Installation Manual

RMC Recommended minimum specific position
data
SSD AIS ship static data
TRL AIS transmitter-non-functioning log
TXT Text transmission
VDM AIS VHF data-link message (Incoming)
VDO AIS VHF data-link message (Outgoing)
VER Version
VSD AIS voyage static data
VTG Course over ground and ground speed
In addition to these, the following sentence received on the Sensor ports will be echoed
over the Pilot port and the ECDIS port.
Signa- Description
ture
HDG Heading, deviation and variation
HDT Heading true
THS True Heading and Status
ROT Rate of Turn
5.6 Sentence output filtering
Each of the ports has a filter that can be configured to determine which signatures are
outputted though that port. By default they will be set up as follows:
Port Name Baud
DGPS 38400
LR 38400
ECDIS 38400
PILOT 38400
PORT
44
CA2 Installation Manual
Signatures
RMC, GBS, GGA, GSA, GSV, VTG (All from Internal GNSS)
LRF, LR1, LR2, LR3
RMC, GBS, GGA, GSA, GSV, VTG (All from Internal
GNSS) HDG,HDT,THS,ROT (echoed from sensor ports - Unfiltered)
ABK, ACA, ACS, ALC, ALF, ALR, ARC, EPV, HBT, RMC, SSD, TRL,
TXT, VDM, VDO, NAK (Unfiltered)
RMC, GBS, GGA, GSA, GSV, VTG (All from Internal GNSS)
HDG, HDT, THS, ROT (echoed from sensor ports - Unfiltered)
ABK, ACA, ACS, ALC, ALF, ALR, ARC, EPV, HBT, RMC, SSD, TRL,
TXT, VDM, VDO, NAK (Unfiltered)
Y1-03-0294 Rev. A
Sent every second from the
internal GPS Receiver
In Response to an AIQ request
In Response to an AIQ request
In Response to an AIQ request
On receipt of and AIS VDL mes-
sage on Channel A or B
On transmission of a own ship
VDL message on Channel A or B
In Response to an AIQ request
In Response to an AIQ request
Sent every second from the
internal GPS Receiver
28/04/2020