Table of Contents
Advertisement
2.
Menu Key
Pressing the menu key will access the CA2 menu system. The menu screen that appears
will depend on the screen in use when the menu key is pressed. The menu key can also be
used to close the menu system.
3.
Pilot Plug
The pilot plug allows pilots and other mariners to connect a laptop PC or other portable
device directly into the CA2 giving access to the AIS information of the vessel including
necessary dynamic and static vessel information.
4.
Enter Key
The enter key on the CA2 allows the user to select a highlighted field and either see infor-
mation or enter information as necessary. This entering process can also be achieved by
depressing the jog stick on the front panel.
5.
Indicator LED
Green - Power on (blinks off each transmit)
Amber - Silent Mode
Red - Transmit fail
6.
The jog stick allows the user to navigate through the different screens and menus of the
CA2 using directionality of up, down, left and right and also by rotating clockwise and anti-
clockwise. The jog stick can also be depressed as an alternative to using the enter key.
7.
Display Brightness Key
Pressing the display brightness key on the front panel will access a brightness level indica-
tor. Rotate the jog stick to increase or decrease the light level.
8.
Voyage Data Input Key
Pressing the voyage data input key allows quick access to update variable voyage informa-
tion such as navigational status and estimated time of arrival.
9.
Page Key
Pressing the Page key will allow the user to alternate between three target view screens.
These are Map Screen, Target List Screen and Target Radar Screen. Pressing the page key
will close all open menus and windows (except for Alarm pop-up windows) and revert back
to the last active target view screen.
28/04/2020
CA2 Installation Manual
Jog Stick
Y1-03-0294 Rev. A
23
Advertisement
Table of Contents
