Table of Contents
Advertisement
After fixing the GNSS antenna to an appropriate location, route the 10m cable to your AIS
transceiver unit, adding extension cable as necessary.
DO NOT cut the GNSS Antenna cable to shorten. Neatly coil and tie excess
!
cable
The cable may be extended using any suitable low loss RF co-axial cable
!
up to a maximum total length of 20m. Ensure all connections are made
correctly using connectors suitable for the RG174 cable and tested for con-
tinuity.
Extension cables must be terminated with a TNC connector suitable for
!
connection to the CA2.
Connect the cable to the GNSS connector on the CA2.
28/04/2020
CA2 Installation Manual
Y1-03-0294 Rev. A
19
Advertisement
Table of Contents
