Table of Contents
Advertisement
4.1.4 Send VDO once per second - Default:
Select this to force the CA2 to transmit your information once every second regardless of
the Navigation Status. If left unchecked then the CA2 will transmit once every:
Navigation Status
Moored or Anchored
Under Way (0-14kn)
Fast Moving (14-23kn)
Very Fast Moving (>23kn)
4.1.5 External EPFS Installed - Default:
Deselect this if there is no secondary Electronic Position Fixing System connected to your
CA2. If this is selected and there is no EPFS then an alarm will sound indicating loss of
communication.
4.1.6 External HDG Installed - Default:
Deselect this if there is no external Heading source connected to your CA2. If this is select-
ed and there is no Heading information available then an alarm will sound indicating loss of
communication.
4.1.7 External ROT Installed - Default:
Deselect this if there is no external Rate of Turn source connected to your CA2. If this is
selected and there is no Rate of Turn information available then an alarm will sound indi-
cating loss of communication.
4.1.8 Use Blue Sign Switch
Setting for Inland Waterways use (see the separate Inland Waterways Supplement).
4.1.9 Long Range Message - Default:
Deselect this if you do not wish the CA2 to transmit the Message 27 Long Range informa-
tion used for the satellite AIS system.
Select and press "OK" when the information on the screen is correct
34
CA2 Installation Manual
Transmits once every
3 minutes (when moving > 3 knots 10 seconds)
10 seconds (when turning 3.33 seconds)
6 seconds (when turning 2 seconds)
2 seconds (when turning 2 seconds)
Y1-03-0294 Rev. A
(Off)
(On)
(On)
(On)
(On)
28/04/2020
Advertisement
Table of Contents
