Table of Contents
Advertisement
CA2 Installation Manual
2.3.11 Final Assembly
Connect the prepared VHF (PL259) and GNSS (TNC Type) plugs to the sockets on the rear
of the main unit
Turn over the green data connectors and carefully plug to the sockets on the rear of the
main unit before placing the main unit into the rear cable cover and securing with the 4x
supplied M5 stainless steel bolts
The CA2 Class A AIS Transceiver is now ready for power up and initial set-up.
28/04/2020
Y1-03-0294 Rev. A
17
Advertisement
Table of Contents
