Table of Contents
Advertisement
2.5 Mounting Templates
Use the centre pages of this manual to assist with the mounting positions and cut-outs
required for the correct positioning of the CA2 unit.
Take great care to check the dimensions as printed on the supplied tem-
!
plates to ensure accuracy has not been affected by the printing process.
Every effort has been taken to ensure the dimensions shown are correct,
!
however it is the installer's responsibility to carefully check the environ-
ment surrounding the unit to ensure adequate cable access and user inter-
action space.
Check carefully the viewing angles shown on page 10 of this manual to
!
ensure visibility during normal operation of the vessel at sea.
28/04/2020
CA2 Installation Manual
Y1-03-0294 Rev. A
21
Advertisement
Table of Contents
