K-Setting The 24-Hour Clock - Traulsen R & A Series Owner's Manual

VII. k - SETTING THE 24-HOUR CLOCK:
The internal timeclock must be set in order for the data storage memory to correctly log events and to
allow any defrost lockout to occur at the correct time of day. If the clock is not set, the control assumes
the time is 12 a.m. at the time power is supplied to the unit. The hours on a 24-hour time clock read the
following way:
H01 = 1:00 a.m.
H02 = 2:00 a.m.
H03 = 3:00 a.m.
H04 = 4:00 a.m.
H05 = 5:00 a.m.
H06 = 6:00 a.m.
Follow the instructions to enter the customer access code on page 11. When the control
displays Thermostat Set High, press the down arrow key
display reads
The display will show
Use the arrow keys
When the correct hour is displayed, press the set button
The display will show
Use the arrow keys to set the minutes
When the correct minutes are displayed, press the set button
The display will then read
You can use the up or down arrow keys
or press the alarm cancel button to exit
VII. INTELA-TRAUL
H07 = 7:00 a.m.
H08 = 8:00 a.m.
H09 = 9:00 a.m.
H10 = 10:00 a.m.
H11 = 11:00 a.m.
H12 = 12:00 p.m.
Clock. Press the set button
Hours. The right two numbers will be flashing.
to set the hour.
Minutes. The right two numbers will be flashing.
Thermostat Set Point High.
)
)
)
(continued)
®
H13 = 1:00 p.m.
H14 = 2:00 p.m.
H15 = 3:00 p.m.
H16 = 4:00 p.m.
H17 = 5:00 p.m.
H18 = 6:00 p.m.
.
SET
.
SET
.
SET
to scroll to the next parameter
.
-14-
H19 = 7:00 p.m.
H20 = 8:00 p.m.
H21 = 9:00 p.m.
H22 = 10:00 p.m.
H23 = 11:00 p.m.
H24 = 12:00 a.m.
until the control
.