I-Adjusting Thermostat Set Point Low; J-Changing The Temperature Scale - Traulsen R & A Series Owner's Manual

VII. i - ADJUSTING THE THERMOSTAT SET POINT LOW:
This parameter sets the low point of the desired cabinet temperature range. Typically, freezers will range
from -6° F to -4° F (-21° C to -20° C) and refrigerators will range from 32° F to 34° F ( 0° C to 1° C) for this
parameter setting. This parameter is preset at the factory and does not have to be adjusted unless the
customer chooses to do so. Note: Set Point Low and Set Point High cannot be set to the same tempera-
ture. There will be at least 1-2 degree difference between the two settings.
Follow the instructions to enter the customer access code on page 11. When the control
displays Thermostat Set High, press the down arrow key
display reads
Use the arrow keys
When the display shows the temperature you want press the set button
The display will then read
You can use the up or down arrow keys to scroll to the next parameter
or press the alarm cancel button to exit
VII. j - CHANGING THE TEMPERATURE SCALE:
The temperature scale determines if the temperature displayed will be in degrees
Fahrenheit or degrees Celsius.
Follow the instructions to enter the customer access code on page 11. When the control
displays Thermostat Set High, press the down arrow key
display reads
The display will start with the current setting either
or for degrees Celsius. Use the arrow keys
When the display shows the scale you want press the set button
The display will then read
You can use the up or down arrow keys
or press the alarm cancel button to exit
VII. INTELA-TRAUL
Thermostat Set Point Low. Press the set button
to adjust the temperature to your desired setting.
Thermostat Set Point High.
)
)
)
Temperature Scale. Press the set button
Thermostat Set Point High.
)
)
)
(continued)
®
.
SET
for degrees Fahrenheit
to toggle between the options.
SET
to scroll to the next parameter
.
-13-
until the control
.
SET
.
SET
until the control
.
.