J-Setting The 24-Hour Clock - Traulsen TU048QC Owner's Manual

VII. j-SETTING THE 24-HOUR CLOCK:
The internal time clock must be set in order for the data storage memory to correctly log events and to allow any defrost
lockout to occur at the correct time of day. If the clock is not set, the control assumes the time is 12 am at the time power
is supplied to the unit. The hours on a 24-hour time clock read the following way:
H01 = 1:00 a.m.
H02 = 2:00 a.m.
H03 = 3:00 a.m.
H04 = 4:00 a.m.
H05 = 5:00 a.m.
H06 = 6:00 a.m.
Follow the instructions to enter the customer access code on page 8. When the control
displays Thermostat Set High, press the down arrow key
display reads
The display will show
Use the arrow keys
When the correct hour is displayed, press the set button
The display will show
Use the arrow keys to set the minutes
When the correct minutes are displayed, press the set button
The display will then read
You can use the up or down arrow keys
or press the alarm cancel button to exi
VII. MICROPROCESSOR CONTROL (cont'd)
H07 = 7:00 a.m.
H08 = 8:00 a.m.
H09 = 9:00 a.m.
H10 = 10:00 a.m.
H11 = 11:00 a.m.
H12 = 12:00 p.m.
Clock. Press the set button
Hours. The right two numbers will be flashing.
to set the hour.
Minutes. The right two numbers will be flashing.
Clock.
)
)
t ) .
H13 = 1:00 p.m.
H14 = 2:00 p.m.
H15 = 3:00 p.m.
H16 = 4:00 p.m.
H17 = 5:00 p.m.
H18 = 6:00 p.m.
until the control
SET
.
SET
.
.
SET
.
to scroll to the next parameter
-11-
H19 = 7:00 p.m.
H20 = 8:00 p.m.
H21 = 9:00 p.m.
H22 = 10:00 p.m.
H23 = 11:00 p.m
H24 = 12:00 a.m.