D) Executing The Head Bed Scan For Pla Or Abs - Renkforce RF2000 v2 Series Operating Instructions Manual

d) Executing the head bed scan for PLA or ABS

The text under the respective figure describes which buttons must be pushed or what must be set when this display is shown.
Start of the heat bed scan
Briefly push the button OK (2) in the main display.
Push OK.
Push OK.
Push OK, to select "Scan PLA" and start the heat bed scan for PLA
this way. Push the direction button "left" 3 x to return to the main
menu.
36
Use the direction buttons (1) to move to the menu item "Configura-
tion".
Use the direction buttons to select "Z Calibration".
Use the direction buttons to move to the menu item "Scan PLA" or
"Scan ABS" (depending on what materials you want to perform the
scan for).
The printer now heats up the printing plate and both extruders auto-
matically (printing plate PLA = 60 °C, ABS = 120 °C; both extruders
PLA = 100 °C, ABS = 100 °C).