Wheels And Tires; Tire Pressure - Mahindra THAR CRDe 2015 Owner's Manual

11 WHEELS AND TIRES

Refer to the "Flat Tire" section in the General chapter for changing a flat tire.

11.1 Tire Pressure

Proper tire inflation pressure is essential to the safe and satisfactory operation of
your vehicle. Three primary areas are affected by improper tire pressure;
• Safety
• Economy
• Ride Comfort and Vehicle Stability
A
B
A Tire size
B Radial tires or bias-ply tire - A radial tire has "RADIAL/STEEL BELTED RADIAL"
on the sidewall. A tire not marked with "RADIAL" is a bias-ply tire.
© Copyright Mahindra & Mahindra Ltd. 042015
Your vehicle is originally equipped with tires supplied by a reputable manufacturer. If
you ever have any questions regarding your tires, please refer to literature supplied
by the tire manufacturer, or to the separate tire warranty provided by the tire
manufacturer. You may also contact Mahindra directly, or the tire manufacturer.
The tire rating of your vehicle is 235/70 R 16 105S
Tire rating is explained as below;
C
D
Tire size (example: 235/70 R16 105S)
U52M01
(A):235 (Three-digit number):This number gives the width in millimeters of the tire
from sidewall edge to sidewall edge. This is called as "Section Width".
(B):70 (Two-digit number): This number, known as the aspect ratio, gives the tires
ratio of height to section width.
C "TUBELESS" or "TUBE TYPE" - A tubeless tire does not have a tube inside the
tire and air is directly filled in the tire. A tube type tire has a tube inside the
tire and the tube maintains the air pressure.
D Max Load Limit
2 3 5 7 0 R 1 6 105 S
WHEELS AND TIRES
11-1