Mahindra THAR CRDe 2015 Owner's Manual page 43

FEATURES AND CONTROL
7.8.3 Trip meter, Odometer, Clock, Mode Button
The trip meter displays the elapsed distance travelled since the last trip reset. There
are two trip meter's (A/B) which can be reset as necessary. The trip meter reading
is displayed only when ignition is ON.
Odometer records and displays the total distance traveled in kilometers. The digital
odometer reading is displayed only when the ignition is ON.
Clock displays the current set time in AM/PM modes. The clock reading is displayed
only when the ignition is ON.
The mode button (A) is used to cycle through "Odometer - Trip A - Trip B - Clock"
modes.
7-10
7.8.4 Engine Coolant Temperature Gauge
A
U52H20
Engine coolant temperature gauge indicates the temperature of the engine coolant.
At normal operating temperature, the needle in the gauge is half way between "C"
and "H".
If the needle is all the way at "H", pull the vehicle to the side and stop the engine for a
while. Restart after needle comes to the normal operating band. If the temperature
again reaches the "H" band, contact Mahindra Authorised dealer for assistance.
Do not continue driving the vehicle with a overheated engine. This will lead to
damage of engine components and engine seizure.
U52H21
© Copyright Mahindra & Mahindra Ltd.042015