Russell Hobbs RHBI75140WD1 Instruction Manual page 53

Maintenance
Cleaning the pump filter
The pump filter system in your Washing Machine prolongs the life of the
pump by preventing foreign objects such as threads, coins, pins, buttons,
etc. We recommend that you clean the pump filter every 2 months.
WARNING: The water in the pump may be hot, wait until it has cooled
down to carry out any cleaning or maintenance
The pump filter is located behind the cover on the front-lower right corner.
To clean the pump filter:
1. Ensure all the water has been emptied from the drum.
2. Open the filter pump cover.
3. Before unscrewing the filter, we recommend you place a container
and an absorbent cloth under it to keep the floor dry. A small amount
of water will come out of the filter as you remove it - this is normal.
4. Turn the filter counter-clockwise to the limit stop.
5. Remove and clean the filter. Remove any foreign materials from the
filter with a soft brush.
6. When finished, replace it by turning it clockwise. The filter handle will
be locked when it is not possible to turn any further and the handle is
horizontal.
53