Table of Contents
Advertisement
Additional Functions
Drying only cycle: select via the programme dial the desired drying
programme in conjunction with your fabrics. Press the dryness level button
to select the degree of dryness that is different to the default one (except
for the wool drying programme).
To cancel the cycle during the drying phase, please press the button for
about 3 seconds. "End" will appear in the display at the end of the program
and the DOOR LOCKED light will go off, it is now possible to open the door.
It is also possible to cancel the drying cycle by turning the programme
selector to the OFF position. It is necessary to wait for the cooling phase's
end (10/20 minutes) and the DOOR LOCKED light to go off before opening
the door.
Delay start
This button allows you to pre-programme the wash cycle to delay the start
of the cycle for up to 24 hours.
Press the Delay start button
and h00
appears on the display, then press it again to set a 1 hour delay (h01
appears on the display). The pre-set delay increases by 1 hour each time
the button is pressed, until h24 appears on the display, at which point
pressing the button again will reset the delay start to zero.
31
Advertisement
Table of Contents
