Russell Hobbs RHBI75140WD1 Instruction Manual page 16

Levelling the Appliance
• Level the appliance using the feet as illustrated in figure 7:
a. turn the nut clockwise to release the screw;
b. rotate the foot to raise or lower it until it touches to the floor;
c. lock the foot by screwing in the nut, until it tightens against
the bottom of the washing machine.
Fig 7.
• Plug in the appliance.
WARNING: contact Customer Services should the power cord need
replacing.
WARNING: installation faults are not covered by the manufacturers
warranty.
16