Russell Hobbs RHBI75140WD1 Instruction Manual page 14

Table of Contents

Advertisement

Water inlet hose connection
• Connect the water hose to the water supply tap (fig. 3) only using the
hose supplied with the appliance (do not reuse old hose-sets).
Fig 3.
SOME MODELS may include one or more of the following features:
• AQUASTOP (fig. 4):a device located on the supply tube that stops water
flow if the tube deteriorates; in this case, a red mark will appear in the
window "A" and the tube must be replaced. To unscrew the nut, press
the one-way lock device "B".
Fig 4.
• AQUAPROTECT – SUPPLY TUBE WITH GUARD (fig. 5): Should water leak
from the primary internal tube "A", the transparent containment sheath
"B" will contain water to permit the washing cycle to complete. At the
end of the cycle, contact the Customer Service Centre to replace the
supply tube
Fig 5.
14

Advertisement

Table of Contents
loading

Table of Contents