14.1
Sending Emergency
Depending on how your radio is programmed, you can send the following Emergency.
Sending Emergency Alarms
Procedure:
Press the programmed Emergency On button.
If the alarm is sent successfully, your radio shows the following indications:
•
The Emergency tone sounds.
•
The amber LED illuminates.
If alarm sending is still unsuccessful after all retries have been exhausted, your radio shows the
following indications:
•
A low pitched tone sounds.
Sending Emergency Alarms with Call
Procedure:
1 Press the programmed Emergency On button.
The red LED illuminates. If the alarm is sent successfully, your radio shows the following
indications:
•
The Emergency tone sounds.
•
The amber LED illuminates.
2 To call, press the PTT button.
3 Wait for the Talk Permit Tone to end, and speak into the microphone.
4 To listen, release the PTT button.
If your radio does not detect voice activity for a predetermined period, the call ends.
14.2
Receiving Emergency
When and where to use: When the caller initiates emergency, your radio shows the following
indications:
•
The emergency tone sounds.
•
The amber LED blinks.
•
The display shows emergency icon and contact alias.
14.3
Exiting Emergency Mode
When and where to use: Your radio automatically exits emergency mode when:
•
An acknowledgment is received (for emergency alarm only).
MN006371A01-AA
Chapter 14: Emergency Operation
27