Recording Management - HIKVISION DS-7100HGHI-F1 Series User Manual

Digital Video Recorder User Manual
4. Go to Configuration → System → Event → Normal Event → Alarm Output .
5. Select an alarm output item from the list. Refer to Alarm Outputfor the alarm output settings.
Configure PTZ Linkage
Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event,
or VCA detection events occur.
Steps
1. Go to Linkage Action interface of the alarm input or VCA detection.
2. Select PTZ Linkage.
3. Select the camera to perform the PTZ actions.
4. Select the preset/patrol/pattern No. to call when the alarm events occur.
Figure 6-21 PTZ Linkage
Note
You can set one PTZ type only for the linkage action each time.

6.5 Recording Management

68