HIKVISION DS-7100HGHI-F1 Series User Manual page 38

Add Network Camera by Device Password
Add network cameras which the password is the same as your video recorder.
Before You Start
• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct. Refer to General for details.
• Ensure the network camera password is the same as your video recorder.
Steps
1. Go to Configuration → Camera → IP Camera . The online cameras on the same network
segment with your video recorder are displayed in the camera list.
2. Click to add the camera.
Add Network Camera Manually
Before You Start
• Ensure your network camera is on the same network segment with your video recorder.
• Ensure the network connection is valid and correct.
• Ensure the network camera is activated.
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click .
3. Set network camera parameters, including IP address, protocol, management port, etc. You can
check Use IPC Active Password to use the device password to add network camera(s).
4. Optional: Click Add More to add another network camera.
5. Click OK.
Digital Video Recorder User Manual
Figure 5-8 IP Camera Management Interface
25