Live View - HIKVISION DS-7100HGHI-F1 Series User Manual

Enable Wizard
The wizard pops up after the device starts up.
Enable Password
You need to enter password for authentication if the device automatically logged out.
Menu Output Mode
Choose output to display local menu.
VGA/HDMI Resolution
Select the output resolution, which must be the same with the resolution of the VGA/HDMI
display.
Output Standard
Select the CVBS output standard as PAL or NTSC.
Mouse Pointer Speed
Set the speed of mouse pointer; 4 levels are configurable.
3. Click Apply.

6.1.2 Live View

Configure General Parameters
You can configure the output interface, mute or turning on the audio, event output interface, etc.
Steps
1. Go to Configuration → System → Live View → General .
2. Configure the Live View parameters.
Live View Mode
Digital Video Recorder User Manual
Figure 6-2 Live View-General
37