HIKVISION DS-7100HGHI-F1 Series User Manual page 60

3. Enter information of the network camera to add.
Use Channel Default Password
If it is checked, the video recorder will add the camera by the set channel default password.
4. Click Add.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Configuration → Camera → IP Camera .
2. Click of an added network camera.
Channel Port
If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the drop-down list.
Digital Video Recorder User Manual
Figure 6-9 Add IP Camera
47