Camera Management; Configure Signal Input - HIKVISION DS-7100HGHI-F1 Series User Manual

Note
• For network cameras, the event images are directly sent as the email attachment. One
network camera only sends one picture.
• For analog cameras, 3 attached pictures will be sent for one analog camera when an event
occurs.
3. Click Apply.

5.3 Camera Management

5.3.1 Configure Signal Input

For certain models of Digital Video Recorder (DVR), you can configure the analog and IP signal
input types.
Steps
1. Go to Configuration → Camera → Analog .
2. Select signal input type as HD/CVBS or IP for each channel.
HD/CVBS
Four types of analog signal inputs including Turbo HD, AHD, HDCVI, and CVBS can be
connected randomly for the channel.
IP
Network camera can be connected for the channel.
3. Click Apply. You can view the maximum network camera accessible number in Max. IP Camera
Number.
Digital Video Recorder User Manual
Figure 5-6 Signal Input Type
23