Section - 5 - Optional Equipment; 22" X 22" Quick-Change Platform (Not Available In Ce Markets); 26" X 26" Quick-Change Platform (Not Available In Ce Markets); Tool Tray - JLG AM Series Operation And Safety Manual

5.1 OPTIONAL EQUIPMENT
The following optional equipment is available for AM model
machines:
22" x 22" Quick-Change Platform
The 22" (56cm) long by 22" (56cm) wide platform features a
gull wing gate opening.
26" x 26" Quick-Change Platform
The 26" (66cm) long by 26" (66cm) wide platform features a
side entry gate opening.
28" x 26" Quick-Change Platform
The 28" (71cm) long by 26" (66cm) wide platform features a
gull wing gate opening.

Tool Tray

Platform attachment to hold hand tools or other small items
placed in the tray.

Fluorescent Tube Caddy

Platform attachment for handling fluorescent tubes.
31215807
SECTION 5. OPTIONAL EQUIPMENT
(Not Available in CE Markets)
(Not Available in CE Markets)
(Not Available in CE Markets)
SECTION 5 - OPTIONAL EQUIPMENT

Crane Hook

Attached at the top rear of the mast, the crane hook is used to
lift the machine up or down to another level.
Extra Power Pack
(Battery, Charger & Case)
Includes the battery, charger and molded case.

Platform Auxiliary Power Lowering Device

The Platform Auxiliary Power Lowering device is a switch acti-
vated battery backed electrical circuit designed to provide
power to the platform control box in the event of loss of the
machines power supply.

Hour Meter

(See Figure 5-1., Hour Meter Location.
The machine hour meter accumulates pump operation time
during the platform LIFT UP cycle only. The reading indicates
hours and tenths of an hour.
5-1