Lindy 38148 User Manual page 6

User Manual English
Picture in Picture Layouts
This matrix allows for content from multiple source devices to be shown on a single display using Picture
in Picture mode. The layouts are shown below.
Infrared Control
1. Power button: Power the matrix on or off.
2. Audio: Press to cycle through the audio output EDID.
3. ARC: Press to activate or de-activate ARC.
4. PiP: Press to activate PiP mode. The displays connected to HDMI Out A and HDMI Out B will switch
to the same HDMI source device.
5. Select: Press to cycle through the HDMI source device connections for Picture in Picture mode.
6. Enter: Press to confirm the selected HDMI source device for Picture in Picture mode.
7. Out A: Press the corresponding Input to output to HDMI Out A.
8. Out B: Press the corresponding Input to output to HDMI Out B.