Advertisement
Available languages
Available languages
User Manual
Installation and Operation
Front Panel
1. ON/OFF: Power the matrix on or off.
2. Input LED (1-6): The corresponding LED will illuminate once an active HDMI source device has been
connected. A/B indicates the corresponding output the source device is switched to.
3. EDID LED: This LED will illuminate when the corresponding audio EDID has been selected.
4. ARC LED: This LED will illuminate when the ARC function has been selected.
Please note: ARC is only possible when using HDMI Output A
5. Power LED: This LED will illuminate when the matrix is connected with a power supply and switched
on.
6. Out A Button: Press this button to select the source for output A.
7. Out B Button: Press this button to select the source for output B.
8. EDID Button: Press this button to select the audio output EDID: 2.0CH / 5.1CH / 7.1CH
9. ARC Button: Press this button to select the ARC function.
10. RST Button: Press this button to reset back to factory default settings (Input 1, 2.0CH Audio, ARC off)
11. IR: IR receiver eye for control via the IR remote (included).
Rear Panel
1. HDMI Input: Connect an HDMI source to the desired port using HDMI cable.
2. HDMI Output: Connect an HDMI display to the desired port using HDMI cable.
3. 3.5mm Output: Extract analogue 2CH audio to an amplifier or stereo speakers.
4. TosLink (Optical) Output: Extract digital audio to an amplifier, speakers or soundbar.
5. 5VDC: Connect the 5VDC 1A PSU to an AC wall outlet and securely connect to the matrix.
Please note:
Audio will only be extracted to 3.5mm and TosLink (Optical) from HDMI Out A. The audio EDID must be
set to 2CH when using the 3.5mm connection otherwise no audio will be output.
HDCP 2.2 is only supported on HDMI In 1.
MHL is only supported on HDMI In 6. Active MHL to HDMI cable is required (not included).
ARC is only supported on HDMI Out A. To use ARC the connected display must also support ARC.
When ARC is not selected, the matrix will output audio from the selected source device. When ARC is
selected, ARC signal from the TV will be used.
English
Advertisement
