Domain Filtering - TP-Link TL-WR642G User Manual

4.8.3 Domain Filtering

The Domain Filtering page (shown in Figure 4-35) allows you to control access to certain websites
on the Internet by specifying their domains or key words.
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable
Domain Filtering have been selected on the Firewall page. To Add a Domain filtering entry, click
the Add New... button. The page "Add or Modify a Domain Filtering entry" will appear, shown
in Figure 4-36:
To add or modify a Domain Filtering entry, follow these instructions:
1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to
take effect. For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03
to 17:05.
2. Domain Name - Type the domain or key word as desired in the field. A blank in the domain
field means all websites on the Internet. For example: www.xxyy.com.cn, .net.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.
TL-WR642G
Figure 4-35 Domain Filtering
Figure 4-36 Add or Modify a Domain Filtering entry
108M Wireless Router User Guide
47