ATD Tools SwiftLift ATD-7325 Operating Instructions & Parts Manual page 4

WARNING
!
Do not
a pair
Lifting
Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only on area of the
!
2.
saddle under lift point.
5. Transfer the load
NEVER use hydraulic jack as a stand alone device! ALWAYS transfer the lifted load IMMEDIATELY to a
!
pair of appropriately rated jack stands. Use one pair of jack stands per vehicle. Rated capacity is per
pair only! Do not exceed rated capacity.
Lowering
Be sure all tools and personnel are clear before lowering load. Slowly open the release valve! The more
!
you turn the handle counter-clockwise, the faster the load will come down. Maintain control of the rate
of speed at which the load lowers at all times!
2.
3.
all printed
WARNING
!
To avoid
Never
Do not
and sober
If the load fails to lower:
X
: