Flashforge FINDER Quick Start Manual page 10

8. After first leveling point completed, start the other two leveling points.
Attention: when starting the second and the third leveling points, just need to adjust one
corresponding nut under extruder.
Turn the corresponding nut under
the platform clockwise until
you hear the beep.
9. Follow the prompts on the touch screen to adjust the corresponding nut till you hear a steady
beep.
Congartulations
Tap the [OK] button to move to
the next leveling point.
10. If the distance is appropriate, tap [ok] to next
step. If the diastance still not appropriate,
please follow the prompts on the touch
screen to adjust till you see [ok].
Distance Too Small
Turn the corresponding nut under
the platform anticlockwise until
you hear the beep.
Leveling completed!
11. Start the third leveling point according to the
method of the second leveling point.
After leveling completed, tap return arrow to
go back to home screen.
09
Finish