Usb Bracket, System Board - HP Chromebook Enterprise x360 14E G1 Maintenance And Service Manual

USB bracket, system board

Table 5-12 USB bracket, system board spare part information
Description
USB bracket
Before removing the USB bracket from the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
a. Battery (see
b. Fan (see
c. System board (see
Remove the USB bracket from the system board:
1. Remove the Phillips M2.0×4.0 screw (1) that secures the USB bracket to the system board.
2. Remove the USB bracket (2).
Reverse this procedure to install the USB bracket.
Bottom cover on page
Battery on page 24)
Fan on page 27)
System board on page
22), and then remove the following components:
38)
Component replacement procedures
Spare part number
L36909-001
41