HP Chromebook Enterprise x360 14E G1 Maintenance And Service Manual page 45

2. Remove the Phillips M2.0×3.0 screw (1) that secures the system board to the keyboard/top cover.
3. Remove the Phillips M2.0×4.0 screw (2) from the USB bracket.
4. Lift the left side the system board (3) until it rests at an angle.
NOTE: The I/O board cable is connected to the bottom of the system board. Make sure not to accidentally
damage the I/O board cable when releasing the system board
5. Release the system board (4) by sliding it up and to the left at an angle as far as the I/O board allows.
6. Turn the system board upside down (1).
Component replacement procedures 39