Cabinet Requirements; Srx1400 Services Gateway Cabinet Requirements; Cabinet Size And Clearance Requirements - Juniper SRX1400 Hardware Manual

CHAPTER 9

Cabinet Requirements

IN THIS CHAPTER

SRX1400 Services Gateway Cabinet Requirements | 77

SRX1400 Services Gateway Cabinet Requirements
IN THIS SECTION

Cabinet Size and Clearance Requirements | 77

Cabinet Airflow Requirements | 78
This topic includes the following sections:
Cabinet Size and Clearance Requirements
The minimum size cabinet that can accommodate the services gateway is 27.5 in. (69.8 cm) wide and 31.5
in. (80.0 cm) deep. The cabinet must allow at least 5 in. (13 cm) of clearance on each side of the chassis
to allow for cooling air to flow through the vents on each side of the device. A cabinet larger than the
minimum requirement provides better airflow and reduces the chance of overheating.
Allow at least 3 in. (7.6 cm) of vertical clearance between the top and bottom of the services gateway and
other devices in the cabinet.
If you provide adequate cooling air and airflow clearance, you can stack eight devices in a cabinet that has
at least 40 U (70 in. or 1.78 m) of usable vertical space.
77